by cooked hyperliquid attach updated checked 6d ago

metamask's referral prompt on hyperliquid, and using a different code

Right after you connect MetaMask to Hyperliquid, MetaMask's side panel shows a box already ticked: "Apply a MetaMask referral code to all future trades". Untick it before you press Confirm, then put a code on the account yourself, through a join link or the referrals page. Any Hyperliquid referral code takes 4% off your fees for your first $25M of volume, so MetaMask's code and ours save you the same, and the box only decides who is paid. What costs you more is a builder fee: MetaMask's in-wallet perps charge 0.1432% taker at the entry level, against 0.0432% at Hyperliquid's base tier with any referral code.

using a different code

Right after connecting MetaMask to Hyperliquid: MetaMask's side panel reads Save 4% on Hyperliquid, with Apply a MetaMask referral code to all future trades already ticked above Confirm, beside Hyperliquid's terms window. Wallet masked.
  1. Connect MetaMask on Hyperliquid.
  2. In MetaMask's side panel, untick "Apply a MetaMask referral code to all future trades" before you press Confirm.
  3. Accept Hyperliquid's terms. MetaMask then asks for a signature whose type is "Hyperliquid:AcceptTerms". That is the terms, not a referral.
  4. Deposit first (where deposit is on hyperliquid), then enter a code on the referrals page: with nothing deposited, its Enter Code window shows only a "Need to Deposit" button. The other route is the join link below.
The same MetaMask panel with Apply a MetaMask referral code to all future trades unticked, Confirm still below it, and Hyperliquid's terms boxes ticked. Wallet masked.

Untick it only if you do step 4. With no code at all you pay the full fee.

Or skip MetaMask's panel entirely: Hyperliquid's Connect window lists "Log in with Email" above the wallets. What the email flow asks for after that window is not covered here.

what the prompt is

It is MetaMask's, not Hyperliquid's. Right after you connect MetaMask to Hyperliquid, Hyperliquid opens its terms window, and at the same time MetaMask's side panel shows "Save 4% on Hyperliquid" with one box already ticked: "Apply a MetaMask referral code to all future trades per Hyperliquid's terms. MetaMask earns a fee." The box can be unticked, and Confirm stays available.

what you get either way

A referral code is 4% off your fees for your first $25M of volume. Hyperliquid attaches that to using a code, not to whose code it is. MetaMask's saves you exactly what ours does.

The difference is who gets paid: MetaMask's code earns MetaMask a fee, and ours earns us a commission.

the builder fee is the part that costs you

An app that sends your orders charges a builder fee, on top of Hyperliquid's own fee. Hyperliquid caps it at 0.1% on perps and 1% on spot. For each builder, you approve a maximum, your main wallet signs that approval, and you can revoke it at any time. Hyperliquid makes the approved maximum available through the API, and doesn't say where the app shows it.

MetaMask's in-wallet perps, which run on Hyperliquid, list 0.1432% taker and 0.1144% maker at Rewards levels 1 to 3, and for anyone not opted in to Rewards. Hyperliquid's base tier with any referral code is 0.0432% taker and 0.0144% maker. Both gaps are exactly 0.1%, the builder-fee cap. MetaMask does not split its total; that arithmetic is ours.

On a $10,000 perp opened and closed with market orders, that is $28.64 in taker fees inside MetaMask and $8.64 on Hyperliquid with a code.

No screen in the MetaMask connect flow asks for a builder fee approval. The box it ticks in advance is the referral code.

what hyperliquid doesn't say

Whether unticking and confirming leaves you with no code, and whether you can still add one after. did the code attach has the check.

If you're new to Hyperliquid, the link below is our referral link.

Open Hyperliquid code APEBRIEF

Using this code takes 4% off your Hyperliquid fees for your first $25M of volume, which trading without a code does not. We get a commission from Hyperliquid, which helps support our work, at no extra cost to you. We might add tools for people who used our code.

Tapping the button puts APEBRIEF on your clipboard and opens Hyperliquid. Where the signup shows a code field, paste it there.

People also ask

Did the Hyperliquid code attach?

Enter a code on the referrals page or arrive by link, per the docs. What that page shows once a code is set, and whether it applies to an account that already traded, is not something we have seen yet.

the full answer
Hyperliquid referral code

Entered on the referrals page or by link. 4% off taker fees for your first $25M, per the docs. Not for vaults or sub-accounts. Not an Axiom code.

the full answer
Hyperliquid taker fee?

Base perp taker 0.045%, maker 0.015%, 14-day tiers. A referral is a fee cut on the first stretch of volume. Not a cut of the notional. This page does not send you to Axiom.

everything we have on Hyperliquid

How we know: every number on this page

13 sources
  1. our own screenshots: right after connecting a fresh MetaMask account to Hyperliquid, MetaMask's side panel offers a MetaMask referral code with its box already ticked, beside Hyperliquid's terms window; the box can be unticked before Confirm, and the terms signature that follows is separate pre-ticked · the owner's screenshots, 26 Sep 2026, fresh throwaway MetaMask account, connecting from Hyperliquid's Vaults page. (1) Hyperliquid's 'Connect' modal; MetaMask's panel: 'Connect this website with MetaMask', permissions 'See addresses, balances, and activity', 'Send requests for transactions', 'Cannot move funds without your permission'; Cancel / Connect. (2) After connecting, Hyperliquid shows its 'Terms of Use, Privacy Policy, and Cookie Policy' window (Decline / Accept) while MetaMask's side panel shows 'Save 4% on Hyperliquid', 'Save 4% on trades with a MetaMask referral code.' and an already-ticked box: 'Apply a MetaMask referral code to all future trades per Hyperliquid's terms. MetaMask earns a fee.' with Confirm. (3) The same panel with the box unticked, Confirm still available. (4) After Accept: MetaMask 'Signature request' from app.hyperliquid.xyz, primary type 'Hyperliquid:AcceptTerms', HyperliquidChain 'Mainnet'. Our 22 Sep 2026 note had called the ticked item a builder fee approval; these screens show it is a referral code. No builder fee approval appears in the four screens.2026-09-26
  2. any referral code gives the user 4% off fees for their first $25M of volume 4% · source2026-09-26
  3. the two documented ways a code gets onto an account: entered on the referrals page, or a referral link of the form app.hyperliquid.xyz/join/CODE referrals · source2026-09-26
  4. a builder fee is approved per builder as a maximum, can be revoked at any time, and is capped at 0.1% on perps and 1% on spot 0.1% · source2026-09-26
  5. the approval is an action the main wallet signs, and a builder's fee is charged on orders that carry that builder's parameter ApproveBuilderFee · source2026-09-26
  6. the maximum builder fee a user has approved for a builder can be read through the API maxBuilderFee · source2026-09-26
  7. base-tier perp fees on Hyperliquid 0.045% · source2026-09-26
  8. MetaMask's in-wallet perps run on Hyperliquid, and charge 0.1432% taker and 0.1144% maker at Rewards levels 1 to 3 and for anyone not opted in to Rewards 0.1432% · source2026-09-26
  9. derived: Hyperliquid's base-tier fee with a referral code, and what MetaMask's entry-level rate adds on top 0.0432% · derived from s3, s9 and s10: taker 0.045% x 0.96 = 0.0432%; maker 0.015% x 0.96 = 0.0144%. 0.1432% - 0.0432% = 0.1%; 0.1144% - 0.0144% = 0.1%. Both differences equal the perps builder-fee cap in s6. MetaMask does not say this is how the total is made up; the arithmetic is ours.2026-09-26
  10. derived: taker fees on a $10,000 perp opened and closed, through MetaMask's in-wallet perps at the entry level and on Hyperliquid's base tier with a code 10,000 · derived from s10 and s11: 10,000 in + 10,000 out = 20,000 notional; x 0.001432 = 28.64; x 0.000432 = 8.64; difference 20.00. Assumes market orders, no volume tier and no staking discount.2026-09-26
  11. the only Hyperliquid page that says a builder code overrides a referral code is the staking referral proposal, which has no mainnet implementation proposal · source2026-09-26
  12. Hyperliquid's Connect window offers an email login above the wallets Log · the owner's screenshot, 26 Sep 2026, app.hyperliquid.xyz 'Connect' window: 'Log in with Email' at the top, then 'OR', then 'MetaMask', 'WalletConnect', 'OKX Wallet', 'Coinbase Wallet'. The email flow past this window was not captured.2026-09-26
  13. on an account with nothing deposited, the referrals page's Enter Code window has no code field, only a Need to Deposit button Need · our screenshot Sep 2026: Referrals page (app.hyperliquid.xyz/referrals), an 'Enter Code' button, which opens a window titled 'Enter Code': 'Enter a referral code and receive a discount on your fees.' and one button, 'Need to Deposit'; no code field. Recording account, wallet connected, nothing deposited, nothing typed.2026-09-26

next

  1. Did the Hyperliquid code attach?Hyperliquid puts referral codes in one place, the referrals page: a code is entered there or applied by using a referral link, and it gives a 4% discount on fees for your first $25M in volume.
  2. Hyperliquid referral codeA Hyperliquid referral code is 4% off your fees for your first $25M of volume.
  3. Hyperliquid taker fee?A $10,000 position opened and closed with market orders costs $9.00 in fees at the base rate
  4. how to turn ETH you deposited on hyperliquid into USDCSell it on the ETH spot market against USDC. ETH sent on Ethereum lands as a spot balance, not as margin, so the sell comes first.
  5. comparehyperliquid vs lighter: fees, the code and getting money inHyperliquid for most perp traders: it's the more established venue, a code takes 4% off your fees for your first $25M of volume, and the code can go on after sign-up.