# uxento portfolio: create, import and fund your wallets

Open Portfolio from the toolbar. Click Create Wallet for a new wallet or Import to bring one in, then fund it from the wallet overview: click Deposit and send to the address shown, or scan the QR code. Each tool then takes the wallet you assign it.

## the screen

Three tabs across the top: Wallets, Bridge, Split. Below them, one button per chain: SOL, BNB, BASE, ETH, RH, ARC, USD1, MONAD.

The Wallets tab lists your wallets with their balance and actions. One is marked Default Wallet; that's the one Bridge fills in for you. Above the list sit Groups, Create Wallet, Import and New folder, for sorting wallets into folders.

![Uxento Portfolio on the Wallets tab: a Default Wallet with Create Wallet and Import above it, chain tabs on the right and the Consolidate Balances panel.](https://apebrief.com/assets/media/ux-portfolio-wallets.png)

## add a wallet

1. Open Portfolio.
2. Click **Create Wallet** for a new one, or **Import** to bring in a wallet you already have.
3. It joins the list. Drop it in a folder with New folder if you run a lot of them.

![The Import Private Keys window in Uxento Portfolio: name prefix, folder, a box for keys and an Import Key button, secured by Turnkey.](https://apebrief.com/assets/media/ux-portfolio-create.png)

## fund a wallet

1. Click the wallet button at the top right of the app. The Deposit window opens.
2. Pick SOL or BNB.
3. Send funds to the deposit address shown, or scan the QR code from your phone wallet.

![Uxento's Deposit window: SOL and BNB tabs, the line Deposit SOL through the Solana network for this address, and the deposit address with its QR code, both blacked out.](https://apebrief.com/assets/media/ux-deposit.png)

Withdraw is the tab next to Deposit. If you plan to launch coins, 0.1 SOL is the least Uxento recommends holding.

Need a chain other than Solana? Robinhood runs on ETH, so hold ETH in your uxento wallet to trade there. For SOL to BNB, use Bridge; for SOL to ETH, Base or Monad, use Split.

## move money between wallets

**Consolidate.** Drag a source wallet and a destination wallet into the Consolidate Balances panel, set how much goes where, then click **Review & Start Transfer**.

**Split.** Funds several wallets in one go, through SplitNow. Pick the source currency and amount and the currency to receive (26+ to choose from), click Add for each recipient wallet, set the split or click Equal, then Create Split Order. Order Status and Order History show where it is.

**Bridge.** Swaps SOL and BNB, through Sideshift. Enter the amount; the receiving wallet fills in with your default wallet on that chain. The quote holds for 15 minutes. Click **Bridge Now** and the coins arrive within minutes.

## give each tool its wallet

- **uTek.** Click Wallets in uTek, pick a wallet from the dropdown or create one, then click Set Up to add nonces. That costs about 0.0116 SOL and has to happen before you create tasks. [utek](/uxento/utek/)
- **Auto Sniper.** Set its Sniper Wallet in the Auto-Sniper settings. You can change it any time. [automations](/uxento/automations/)
- **Automations presets.** Each preset names its preferred wallets.
- **uDev.** Tools that use several wallets at once need different wallets per tool, so make them in Portfolio first. [udev](/uxento/udev/)

## archive and delete

Click the Archive icon on a wallet to put it away. Archived wallets sit in the Archived tab, where you can restore them.

Delete only exists in the Archived tab, and it's permanent. Move a wallet's balance out before you delete it.

The link below is our Uxento referral link, if you're setting up an account. Code **apebrief**.

> **code apebrief.** Open Uxento through https://go.apebrief.com/uxento/portfolio-001-end?src=md&asset=uxento%2Fportfolio&cta=after-resolution and paste the code where the signup shows a code field. We get a commission from Uxento, which helps support our work, at no extra cost to you.

## how we know: every number on this page

- Portfolio is the wallet hub: create, import, archive and manage wallets across chains; it opens from the toolbar at the top left **Portfolio** (https://docs.uxento.io/portfolio/), checked 2026-10-07
- the Portfolio screen: tabs Wallets, Bridge, Split; chain buttons SOL, BNB, BASE, ETH, RH, ARC, USD1, MONAD; Groups, Create Wallet, Import, New folder; columns Wallet, Balance, Actions; a Default Wallet; Consolidate Balances with SOURCE and DESTINATION **SOL** (our screenshot, 7 Oct 2026, Portfolio: buttons 'Wallets | Bridge | Split | SOL | BNB | BASE | ETH | RH | ARC | USD1 | MONAD | Consolidate | Groups | Create Wallet | Import | Select all wallets | New folder' 'Select Default Wallet'; text 'Wallet' 'Balance' 'Actions' 'Default Wallet' 'Consolidate Balances' 'SOURCE' 'Drag wallets here' 'DESTINATION' 'Review & Start Transfer'), checked 2026-10-07
- to fund a wallet: wallet overview, Deposit, send to the address shown or scan the QR; Withdraw is the tab next to it; 0.1 SOL is the minimum recommended to launch a coin **0.1** (https://docs.uxento.io/tools/udev/), checked 2026-10-07
- Consolidate: drag source and destination wallets into the panel, set the distribution, click Review & Start Transfer **Review** (https://docs.uxento.io/portfolio/), checked 2026-10-07
- Split Crypto funds several wallets at once through SplitNow: source currency and amount, currency to receive, 26+ currencies, Add recipients, Equal, Create Split Order; Order Status and Order History tabs **26+** (https://docs.uxento.io/portfolio/), checked 2026-10-07
- Bridge swaps SOL and BNB through Sideshift; the receiving wallet defaults to your default wallet on that chain; a quote lasts 15 minutes; click Bridge Now; funds arrive within minutes **15** (https://docs.uxento.io/portfolio/), checked 2026-10-07
- archive from the Portfolio overview; delete permanently only from the Archived tab; restore from the same tab **Archived** (https://docs.uxento.io/portfolio/), checked 2026-10-07
- uTek needs an assigned wallet with nonces set up (about 0.0116 SOL): Wallets button, pick from the dropdown or Create, then Set Up **0.0116** (https://docs.uxento.io/tools/utek/), checked 2026-10-07
- Auto Sniper buys from a dedicated Sniper Wallet set in its settings, changeable at any time; Automations presets name preferred wallets **Sniper** (https://docs.uxento.io/tools/automations/), checked 2026-10-07
- uDev's multi-wallet tools need separate wallets, made in Portfolio; Portfolio is where you add, import or manage wallets **Portfolio** (https://docs.uxento.io/tools/udev/), checked 2026-10-07
- Robinhood chain runs on ETH, so you need ETH in your uxento wallet; Split Crypto moves SOL to ETH, Base and Monad **ETH** (https://docs.uxento.io/tools/udev/), checked 2026-10-07

## next

- [uxento fees: 0.75% a udev trade, 1.00% a launch, and what you set yourself](https://apebrief.com/uxento/fees/): Buying or selling through uDev costs 0.75% plus the launchpad's own fee. Creating a coin costs 1.00% plus the launchpad's fee.
- [how to set up utek, uxento's sniper and copy trader](https://apebrief.com/uxento/utek/): uTek is Uxento's sniper and copy trader.
- [how to install uxtension and connect it to uxento](https://apebrief.com/uxento/uxtension/): Add uxtension from the Chrome Web Store with Add to Chrome. It's free, it runs on Axiom, GMGN and Photon, and Axiom is the one Uxento recommends.
- [copy trading with utek: picking the wallet, sizing, and when to stop](https://apebrief.com/uxento/copy-trading-strategy/): Watch a wallet before you copy it.

---
HTML version: https://apebrief.com/uxento/portfolio/ · figures checked 2026-10-07